What are the Best Motherboard Header to Plug in Liquid Cooling to?

What are the Best Motherboard Header to Plug in Liquid Cooling to?

What are the Best Motherboard Header to Plug in Liquid Cooling to? Liquid cooling is a method of keeping your computer cool by circulating water through its components. The idea behind liquid cooling is to remove heat from the CPU and other parts of the system using a pump and radiator. This allows you to run your PC at higher temperatures without overheating.

Liquid cooling is becoming more popular because it provides better performance and a longer lifespan compared to air cooling. To maximize the efficiency of your liquid cooling setup, you should consider buying a high-quality motherboard header.

What are the Best Motherboard Header to Plug in Liquid Cooling to?

Corsair H100i V2 Cooler – Water Pump Connector

You’re right! Plugging the pump into the water pump header won’t cause any problems. However, you’ll need to use an adapter to connect the radiator fans to the power supply.

Connect With The Liquid Cooling Community

Get the latest news and tips about cool products, share your thoughts and wish with the EK team, and connect with the enthusiast community to get more out of your liquid cooling system.

Check out EK’s high-performance liquid cooling pumps, a large selection of D5, DC, and SPC pumps designed for every system. Pumps include optional motors with or without tops and RGB lighting. Shop now!

A multi-functional hub helps users to install systems more easily and effectively. The system fan should be connected to the hub to get the best thermal sensing effect.

Hub and related accessories

The following is MAG CORE LiQUE RH Hub’s accessories information. A. Power supply: provide power to the hub B and C. Fan: cool down the hub D. USB Type C to Micro SD card reader: connect the micro SD card reader to the motherboard E. Thermal sensor: attach the thermal sensor’s connector end to the surfaces of other parts within the chassis to sense the temperature of those parts, and use the built-in fan curves in the hub to control their speeds F. USB Type C to HDMI port: connect the HDMI port to the monitor G. Audio jack: plug the audio jack into the sound card H. Headphone jack: plug the headphone jack into the sound card I. Speaker: plug the speaker into the sound card J. AC

D.J rain bow cable: Connect other brands’ motherboards and hubs, and control fans’ ARGB light through other brands’ ARGB control software. Hub’s connector ports: Main control component. Please refer to the picture above for the description of hub connector ports.

Thermal sensor cable Temperature Detection Fan Curve Adjustment Instructions

The purpose of the hub is to measure the system temperature. When the thermal sensor is not being used, the hub will automatically turn on the fans at full speed. The fans should be placed near the heat source, such as the CPU or GPU.

To change the fan speed, you need to go into the MSI Dragon Center. Then, you need to download the MSI Dragon Center. Once downloaded, open the Dragon Center. Locate the hub within Gaming Gear and then connect the hub to the user scenario profile in the Dragon Center. Turn off sync before you can manually adjust fan curves.

A hub is a device that connects fans. It can control the speed of the fans by adjusting the voltage output. This allows you to change the speed of the fans without having to buy new fans or replace existing ones.

You can only adjust the fan speeds based on the temperatures detected by the thermal sensor cables.

Planning the installation

Most computer cases have multiple mounting spots. You should decide where the radiator will go before installing it. Mounting fans on the radiator is easy. Use the long screws provided. Fans usually have arrows or markings to indicate the direction of airflow.

Most AIO coolers come in two types, Intel and AMD. Each type of bracket fits only one type of processor. To make sure you get the right bracket, check your motherboard manual. You may need to buy a new backplate if you have an older motherboard.

Choosing a water cooling kit for PC

Most reputable brands, like ThermoT ek, Cooler Master, NZXT, and others make liquid cooling kits in sizes between 120mm and 360mm. Liquid cooling kits come with features such as RGB lighting and OLED displays. Some liquid cooling kits are designed for specific CPUs, while others are universal. For example, the Cooler Master Master Liquid ML240 fits most standard ATX cases and provides excellent cooling. However, the 120mm version of this kit does not fit into some cases, and the 360mm version takes up too much room. The larger 360mm versions, like the Arctic Liquid Freezer II, offer superior cooling, but they require more space and cost more than the smaller 120mm options.

conclusion of What are the Best Motherboard Header to Plugin Liquid Cooling to?

I hope this guide helps you choose the best motherboard header to plugin liquid cooling too. If you want to know more about liquid cooling please read our article here. If you want to build a high-performance gaming PC, you must choose a good case, motherboard, graphics card, PSU, RAM, hard drive, SSD, and a suitable cooling solution.

 Also Read:


Leave a Comment

Your email address will not be published. Required fields are marked *